To make sure this part does fit your vehicle Check The Fit
Hood Lift Support - Stabilus - LAND ROVER (Part Number: 5B-308580)
- CTO: MX
- CTP: US
- CTQ: DE
- Emission Code: 1
- Harmonized Tariff Code (HTS): 8302303010
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order ? Part is released to customers for ordering.
- Application Summary: LAND ROVER: 15-21 DISCOVERY SPORT
- AAIA Part Type Description: A pneumatic spring used to open a vehicle?s hood.
- AAIA Part Type Description: HOOD LIFT SUPPORT
- Extended Product Description: Dynamic damping speed control for safety, long life, and fluid motion throughout the entire stroke
- Extended Product Description: Built to OE design to ensure proper fit, form and function
- Extended Product Description: Stabilus gas pressure springs are used whenever loads need to be lifted or lowered in a controlled manner.
- Extended Product Description: No special tools required
- Extended Product Description: Easy to install
- Extended Product Description: High quality standards
- Extended Product Description: Corrosion resistance guarantees the structural strength over lifetime
- Extended Product Description: Highest quality surfaces inside and out
- Extended Product Description: Widest coverage in the industry
- Extended Product Description: Number one OE supplier for truck, bus and car
- Product Description - Invoice: Lift Support
- Key Search Words: Gas Spring Lift Support Lift Strut Gas Strut Prop Prop Rod Lifter Lift Cylinder Lift O Mat Pneumatic Lift
- Agricultural Equipment: N
- Application Specific: Y
- CarLight Truck: Y
- Compressed Length: 227.5 MM
- Compressed Length: 8.96 IN
- End 1 Type: PLASTIC SOCKET
- End 2 Type: PLASTIC SOCKET
- Engine Specific: N
- Extended Length: 356.5 MM
- Extended Length: 14.04 IN
- Heavy Truck: N
- High Performance: N
- IndustrialOff Highway: N
- Marine: N
- Maximum Force: 66 LB
- Maximum Force: 295 KG
- Medium Truck: N
- MotorCycleRV: N
- Mount Hole Diameter At Rod End: 0.394 IN
- Mount Hole Diameter At Rod End: 10 MM
- Mount Hole Diameter At Tube End: 0.394 IN
- Mount Hole Diameter At Tube End: 10 MM
- Mounting Hardware Included: NO
- NonVehicle Specific: N
- Personal Watercraft: N
- Rod Diameter: 0.315 IN
- Rod Diameter: 8 MM
- Small Engine: N
- Snowmobile: N
- Transmission Specific: N
- Tube Diameter: 0.748 IN
- Tube Diameter: 19 MM
- Type: GAS
- Manufacturer:
- Stabilus
- Part Number:
- 5B-308580
- Manufacturer Part Number:
- 5B-308580
- Description:
- Hood Lift Support
- Long Description:
- LAND ROVER
- Part Type:
- Hood Lift Support
- Category:
- Body
- Subcategory:
- Hood
- Warehouse Notes:
- HOOD
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 0.535 lbs.
- Height:
- 1"
- Width:
- 2"
- Length:
- 2"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 2
- Minimum Order Qty:
- 1
- Item GTIN:
- 194879015286
- Item Location:
- DORAL, FLORI
Technical Details
- CTO
- MX
- CTP
- US
- CTQ
- DE
- Emission Code
- 1
- Harmonized Tariff Code (HTS)
- 8302303010
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order ? Part is released to customers for ordering.
- Application Summary
- LAND ROVER: 15-21 DISCOVERY SPORT
- AAIA Part Type Description
- A pneumatic spring used to open a vehicle?s hood.
- AAIA Part Type Description
- HOOD LIFT SUPPORT
- Extended Product Description
- Dynamic damping speed control for safety, long life, and fluid motion throughout the entire stroke
- Extended Product Description
- Built to OE design to ensure proper fit, form and function
- Extended Product Description
- Stabilus gas pressure springs are used whenever loads need to be lifted or lowered in a controlled manner.
- Extended Product Description
- No special tools required
- Extended Product Description
- Easy to install
- Extended Product Description
- High quality standards
- Extended Product Description
- Corrosion resistance guarantees the structural strength over lifetime
- Extended Product Description
- Highest quality surfaces inside and out
- Extended Product Description
- Widest coverage in the industry
- Extended Product Description
- Number one OE supplier for truck, bus and car
- Product Description - Invoice
- Lift Support
- Key Search Words
- Gas Spring Lift Support Lift Strut Gas Strut Prop Prop Rod Lifter Lift Cylinder Lift O Mat Pneumatic Lift
- Agricultural Equipment
- N
- Application Specific
- Y
- CarLight Truck
- Y
- Compressed Length
- 227.5 MM
- Compressed Length
- 8.96 IN
- End 1 Type
- PLASTIC SOCKET
- End 2 Type
- PLASTIC SOCKET
- Engine Specific
- N
- Extended Length
- 356.5 MM
- Extended Length
- 14.04 IN
- Heavy Truck
- N
- High Performance
- N
- IndustrialOff Highway
- N
- Marine
- N
- Maximum Force
- 66 LB
- Maximum Force
- 295 KG
- Medium Truck
- N
- MotorCycleRV
- N
- Mount Hole Diameter At Rod End
- 0.394 IN
- Mount Hole Diameter At Rod End
- 10 MM
- Mount Hole Diameter At Tube End
- 0.394 IN
- Mount Hole Diameter At Tube End
- 10 MM
- Mounting Hardware Included
- NO
- NonVehicle Specific
- N
- Personal Watercraft
- N
- Rod Diameter
- 0.315 IN
- Rod Diameter
- 8 MM
- Small Engine
- N
- Snowmobile
- N
- Transmission Specific
- N
- Tube Diameter
- 0.748 IN
- Tube Diameter
- 19 MM
- Type
- GAS
Specifications
The STABILUS Hood Lift Support contains no remanufactured components, and is designed to operate in either city or highway driving.
Year | Make | Model | Engine | Notes |
---|---|---|---|---|
2017 | Land Rover | Discovery Sport | 2.0L | [Hood Lift Support] Quantity needed per vehicle: 2 |
Warranty Information |
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 6MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|