Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
Catalytic Converter With Integrated Exhaust Manifold - Magnaflow Carb Compliant Converter - California Manifold Catalytic Converter (Part Number: 452282)
- California Air Resources Board (CARB) Certified: Yes
- Clamps Included: No
- Converter Body Length: 7.5 IN
- Converter Body Material: Stainless Steel
- Converter Tube Material: Stainless Steel
- Finish: Stainless Steel
- Grade Type: Regular
- Heat Shield Attached: No
- Inlet Gasket Included: Yes
- Inlet Mounting Hardware Included: No
- Inlet Type: Flanged
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Outlet Type: Flanged
- Overall Length: 18.25 IN
- Sensor Port Count: 1
- Series: California
- Substrate Material: Ceramic
- Title: MagnaFlow California Grade CARB Compliant Manifold Catalytic Converter 452282
- Type: One-Piece
- Abbreviated Product Description: ManiConvrtr
- Associated Comments: Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452282. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2004 Chevrolet Tracker, 1999-2005 Suzuki Grand Vitara, and more, this direct-fit catalytic converter also interchanges with OE parts 14110-67D03 and 14110-67D00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Extended Product Description: California Manifold Catalytic Converter
- Product Description - Invoice: Manifold Converter
- Key Search Words: Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
- Label Description: Manifold Converter
- Marketing Description: Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452282. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2004 Chevrolet Tracker, 1999-2005 Suzuki Grand Vitara, and more, this direct-fit catalytic converter also interchanges with OE parts 14110-67D03 and 14110-67D00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Short Product Description: California
- UN/SPSC Description: 25173701
- CTO: US
- Emission Code: 1
- Harmonized Tariff Code (Schedule B): 8421394000
- Harmonized Tariff Code (HTS): 8421394000
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- NAFTA Preference Criterion Code: B
- National Popularity Description: Non-Stock Item
- NPS: W
- Maximum Cases per Pallet Layer: 1
- Pallet Layer Maximum: 1
- Warranty Special: Limited Lifetime
- Warranty Special UOM: TX
- Manufacturer:
- Magnaflow Carb Compliant Converter
- Part Number:
- 452282
- Manufacturer Part Number:
- 452282
- Description:
- Catalytic Converter With Integrated Exhaust Manifold
- Long Description:
- California Manifold Catalytic Converter
- Part Type:
- Catalytic Converter With Integrated Exhaust Manifold
- Category:
- Exhaust
- Subcategory:
- Catalytic Converter
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 11 lbs.
- Height:
- 7.625"
- Width:
- 8"
- Length:
- 8"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 841380091932
- Item Location:
- DORAL, FLORI
Technical Details
- California Air Resources Board (CARB) Certified
- Yes
- Clamps Included
- No
- Converter Body Length
- 7.5 IN
- Converter Body Material
- Stainless Steel
- Converter Tube Material
- Stainless Steel
- Finish
- Stainless Steel
- Grade Type
- Regular
- Heat Shield Attached
- No
- Inlet Gasket Included
- Yes
- Inlet Mounting Hardware Included
- No
- Inlet Type
- Flanged
- Outlet Gasket Included
- No
- Outlet Mounting Hardware Included
- No
- Outlet Type
- Flanged
- Overall Length
- 18.25 IN
- Sensor Port Count
- 1
- Series
- California
- Substrate Material
- Ceramic
- Title
- MagnaFlow California Grade CARB Compliant Manifold Catalytic Converter 452282
- Type
- One-Piece
- Abbreviated Product Description
- ManiConvrtr
- Associated Comments
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452282. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2004 Chevrolet Tracker, 1999-2005 Suzuki Grand Vitara, and more, this direct-fit catalytic converter also interchanges with OE parts 14110-67D03 and 14110-67D00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Extended Product Description
- California Manifold Catalytic Converter
- Product Description - Invoice
- Manifold Converter
- Key Search Words
- Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
- Label Description
- Manifold Converter
- Marketing Description
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452282. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2004 Chevrolet Tracker, 1999-2005 Suzuki Grand Vitara, and more, this direct-fit catalytic converter also interchanges with OE parts 14110-67D03 and 14110-67D00, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Short Product Description
- California
- UN/SPSC Description
- 25173701
- CTO
- US
- Emission Code
- 1
- Harmonized Tariff Code (Schedule B)
- 8421394000
- Harmonized Tariff Code (HTS)
- 8421394000
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- NAFTA Preference Criterion Code
- B
- National Popularity Description
- Non-Stock Item
- NPS
- W
- Maximum Cases per Pallet Layer
- 1
- Pallet Layer Maximum
- 1
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- TX
Specifications
The MAGNAFLOW CARB COMPLIANT CONVERTER Catalytic Converter With Integrated Exhaust Manifold contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2005 | Suzuki | Grand Vitara | 2.5L | |
| 2004 | Chevrolet | Tracker | 2.5L | |
| 2004 | Suzuki | Grand Vitara | 2.5L | |
| 2004 | Suzuki | Vitara | 2.5L | |
| 2003 | Chevrolet | Tracker | 2.5L | |
| 2003 | Suzuki | Grand Vitara | 2.5L | |
| 2002 | Chevrolet | Tracker | 2.5L | |
| 2002 | Suzuki | Grand Vitara | 2.5L | |
| 2001 | Chevrolet | Tracker | 2.5L | |
| 2001 | Suzuki | Grand Vitara | 2.5L | |
| 2000 | Suzuki | Grand Vitara | 2.5L | |
| 1999 | Suzuki | Grand Vitara | 2.5L |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 6MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|