Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit
To make sure this part does fit your vehicle Check The Fit
- Gates - Molded Turbocharger Hose Kit (Part Number: 26233)
- Clamp 1 - Band Width: .75 IN
- Clamp 1 - Clamping Range Min (mm): 79.5
- Clamp 2 - Clamping Range Min (mm): 79.5
- Inside Diameter 1: 76 MM
- Inside Diameter 2: 76 MM
- Clamp 2 - Clamping Range Min (in): 3.125
- Clamp 2 - Nut Type: .4375 in. Hex-Head
- Clamp 2 - Recommended Torque (in/lbs): 75
- Number of Rings: 1
- Centerline Length: 130 MM
- Clamp 1 - Band Width: 19.1 MM
- Clamp 1 - Clamping Range Min (in): 3.125
- Clamp 2 - Clamping Range Max (in): 3.4375
- Centerline Length: 5.12 IN
- Clamp 1 - Clamping Range Max (in): 3.4375
- Inside Diameter 1: 3 IN
- Inside Diameter 2: 3 IN
- Clamp 1 - Bolt Type: .25 in. - 28 Male Pipe Thread
- Clamp 1 - Nut Type: .4375 in. Hex-Head
- Clamp 1 - Recommended Torque (in/lbs): 75
- Clamp 2 - Band Width: 19.1 MM
- Clamp 2 - Bolt Type: .25 in. - 28 Male Pipe Thread
- Contents: 1 Turbocharger Hose, 2 T-Bolt Clamps
- Clamp 1 - Clamping Range Max (mm): 87.4
- Clamp 2 - Band Width: .75 IN
- Clamp 2 - Clamping Range Max (mm): 87.4
- OE Comparison Rating: OE Improved
- CTO: US
- Harmonized Tariff Code (Schedule B): 4009310000
- Life Cycle Status Code: 4
- SDR Required Flag: N
- Taxable: Y
- Application Summary: 2012-10 Dodge, Ram Series Pickup, 6-Cyl. 6.7 L Diesel, Intercooler To Pipe (Cold Side)
- Short Product Description: Turbo Hose Kit
- TLE: Molded Turbocharger Hose Kit
- Marketing Description: <p>Molded Turbocharger Hose Kits is a one-stop-shop when you need to completely replace a Turbocharger hose system. Brought to market as a superior alternative to fix issues with original equipment manufacturer replacement hoses, Gates' long-lasting commitment to innovation shines through with these kits, keeping your operations up and running longer.</p><ul><li> High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions</li><li> Increased durability due to multiple layers of reinforcement, resulting in longer service life</li><li> Specially formulated oil-resistant Fluorelastomer liner prevents damage</li><li> T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing</li></ul>
- Abbreviated Product Description: Hose Kit
- Product Description - Invoice: Molded Turbocharger Hose Kit
- Manufacturer:
- Gates
- Part Number:
- 26233
- Manufacturer Part Number:
- 26233
- Description:
- Long Description:
- Molded Turbocharger Hose Kit
- Part Type:
- Category:
- Subcategory:
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 1.108 lbs.
- Height:
- 4.914"
- Width:
- 6.411"
- Length:
- 6.411"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 770075604853
- Item Location:
- DORAL, FLORI
Technical Details
- Clamp 1 - Band Width
- .75 IN
- Clamp 1 - Clamping Range Min (mm)
- 79.5
- Clamp 2 - Clamping Range Min (mm)
- 79.5
- Inside Diameter 1
- 76 MM
- Inside Diameter 2
- 76 MM
- Clamp 2 - Clamping Range Min (in)
- 3.125
- Clamp 2 - Nut Type
- .4375 in. Hex-Head
- Clamp 2 - Recommended Torque (in/lbs)
- 75
- Number of Rings
- 1
- Centerline Length
- 130 MM
- Clamp 1 - Band Width
- 19.1 MM
- Clamp 1 - Clamping Range Min (in)
- 3.125
- Clamp 2 - Clamping Range Max (in)
- 3.4375
- Centerline Length
- 5.12 IN
- Clamp 1 - Clamping Range Max (in)
- 3.4375
- Inside Diameter 1
- 3 IN
- Inside Diameter 2
- 3 IN
- Clamp 1 - Bolt Type
- .25 in. - 28 Male Pipe Thread
- Clamp 1 - Nut Type
- .4375 in. Hex-Head
- Clamp 1 - Recommended Torque (in/lbs)
- 75
- Clamp 2 - Band Width
- 19.1 MM
- Clamp 2 - Bolt Type
- .25 in. - 28 Male Pipe Thread
- Contents
- 1 Turbocharger Hose, 2 T-Bolt Clamps
- Clamp 1 - Clamping Range Max (mm)
- 87.4
- Clamp 2 - Band Width
- .75 IN
- Clamp 2 - Clamping Range Max (mm)
- 87.4
- OE Comparison Rating
- OE Improved
- CTO
- US
- Harmonized Tariff Code (Schedule B)
- 4009310000
- Life Cycle Status Code
- 4
- SDR Required Flag
- N
- Taxable
- Y
- Application Summary
- 2012-10 Dodge, Ram Series Pickup, 6-Cyl. 6.7 L Diesel, Intercooler To Pipe (Cold Side)
- Short Product Description
- Turbo Hose Kit
- TLE
- Molded Turbocharger Hose Kit
- Marketing Description
- <p>Molded Turbocharger Hose Kits is a one-stop-shop when you need to completely replace a Turbocharger hose system. Brought to market as a superior alternative to fix issues with original equipment manufacturer replacement hoses, Gates' long-lasting commitment to innovation shines through with these kits, keeping your operations up and running longer.</p><ul><li> High-quality silicone cover provides extreme temperature resistance in high-temperature under-hood conditions</li><li> Increased durability due to multiple layers of reinforcement, resulting in longer service life</li><li> Specially formulated oil-resistant Fluorelastomer liner prevents damage</li><li> T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing</li></ul>
- Abbreviated Product Description
- Hose Kit
- Product Description - Invoice
- Molded Turbocharger Hose Kit
Specifications
The GATES contains no remanufactured components, and is designed to operate in either city or highway driving.
| Year | Make | Model | Engine | Notes |
|---|---|---|---|---|
| 2012 | Ram | 2500 | 6.7L | |
| 2012 | Ram | 3500 | 6.7L | |
| 2012 | Ram | 4500 | 6.7L | |
| 2012 | Ram | 5500 | 6.7L | |
| 2011 | Ram | 2500 | 6.7L | |
| 2011 | Ram | 3500 | 6.7L | |
| 2011 | Ram | 4500 | 6.7L | |
| 2011 | Ram | 5500 | 6.7L | |
| 2010 | Dodge | Ram 2500 | 6.7L | |
| 2010 | Dodge | Ram 3500 | 6.7L | |
| 2010 | Dodge | Ram 4500 | 6.7L | |
| 2010 | Dodge | Ram 5500 | 6.7L | |
| 2010 | Sterling Truck | Bullet 45 | 6.7L | |
| 2010 | Sterling Truck | Bullet 55 | 6.7L |
Warranty Information |
|
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 6MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|