To make sure this part does fit your vehicle Check The Fit
Power Steering Pump Pulley - Cardone New - Power Steering Pump Pulley (Part Number: 3P-35155)
- Belt Type: Serpentine
- Color: Black
- E-Waste: No
- FAQs: Pulleys are painted with weather resistant epoxy paint.
- FAQs: What type of material are pulleys made of?
- FAQs: Yes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.
- FAQs: Do you powder coat your pulleys?
- FAQs: Accessory pulley alignment should be checked using a straightedge if a pulley alignment issue is suspected. The straightedge should lie flat across the fascia of two adjacent pulleys. If the straightedge does not lie flat, then one of the pulleys is misaligned. To validate which of the pulleys is causing the issue, check each against other pulleys until you isolate the one that is out of line. Pulley alignment can also be checked with a laser alignment tool.
- FAQs: The replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.
- FAQs: Flat, V-belt, and Multi groove
- FAQs: What are the different types of pulley designs?
- FAQs: Are there any special tools needed to remove and install the pulley?
- FAQs: How can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
- FAQs: Pulleys are typically made of plastic composite nylon or steel.
- FAQs: The age and continual flexing of a belt will cause it to crack and deteriorate. Stretching loosens the belt, causing it to slip on the pulleys. A cracked belt will eventually break. The tension and general condition of the belt should be checked periodically.
- FAQs: How far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
- FAQs: How important is belt condition and tension?
- Groove Quantity: 6
- Item Grade: Standard Replacement
- Mount Type: Press-Fit
- Mounting Hardware Included: No
- Mounting Hole Quantity: 1
- Outside Diameter: 6.09 IN
- Package Contents: Pulley
- Product Condition: New
- Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Shaft Diameter: 15.00 MM
- Width (Belt) (mm): 22.50
- CTO: US
- Emission Code: 1
- Canadian Harmonizing Tariff Code: 8708999919
- Harmonized Tariff Code (Schedule B): 8708998130
- Harmonized Tariff Code (HTS): 8708998180
- Life Cycle Status Code: 2
- Life Cycle Status Description: Available to Order
- SDR Required Flag: N
- Maximum Cases per Pallet Layer: 75
- Pallet Layer Maximum: 4
- Remanufactured Part: N
- Warranty Distance UOM: MI
- Warranty Special: Limited Lifetime
- Warranty Special UOM: TX
- Warranty Time UOM: MO
- Application Summary: Jeep Wrangler 2011-07
- AAIA Part Type Description: Power Steering Pump Pulley
- Product Description - Invoice: New Power Steering Pump Pulley
- Key Search Words: Pulley, Power Steering Pump Pulley, PS Pulley, Steering Pulley
- Label Description: New Power Steering Pump Pulley
- Marketing Description: Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE New Power Steering Pulleys are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, each pulley installs easily, saving precious labor time while providing peace of mind. In an industry where time is such a valuable commodity, CARDONE strives to help make sure your time is spent wisely.
- Short Product Description: PS Pump Pulley
- Manufacturer:
- Cardone New
- Part Number:
- 3P-35155
- Manufacturer Part Number:
- 3P-35155
- Description:
- Power Steering Pump Pulley
- Long Description:
- Power Steering Pump Pulley
- Part Type:
- Power Steering Pump Pulley
- Category:
- Steering
- Subcategory:
- Power Steering Hoses Pumps And Related Components
- Sales Rank:
Product Details
- Condition:
- New
- Product Fit:
- Direct Fit
- Weight:
- 2.2 lbs.
- Height:
- 2.25"
- Width:
- 6.5"
- Length:
- 6.5"
- UOM:
- EA
- Quantity Sold:
- Sold individually
- Qty Per Application:
- 1
- Minimum Order Qty:
- 1
- Item GTIN:
- 884548254954
- Item Location:
- DORAL, FLORI
Technical Details
- Belt Type
- Serpentine
- Color
- Black
- E-Waste
- No
- FAQs
- Pulleys are painted with weather resistant epoxy paint.
- FAQs
- What type of material are pulleys made of?
- FAQs
- Yes, use of the correct tool based on engine application and pulley type is necessary to prevent damage to the pulley.
- FAQs
- Do you powder coat your pulleys?
- FAQs
- Accessory pulley alignment should be checked using a straightedge if a pulley alignment issue is suspected. The straightedge should lie flat across the fascia of two adjacent pulleys. If the straightedge does not lie flat, then one of the pulleys is misaligned. To validate which of the pulleys is causing the issue, check each against other pulleys until you isolate the one that is out of line. Pulley alignment can also be checked with a laser alignment tool.
- FAQs
- The replacement pulley should be pressed to the point where the hub is flush with the end of the shaft.
- FAQs
- Flat, V-belt, and Multi groove
- FAQs
- What are the different types of pulley designs?
- FAQs
- Are there any special tools needed to remove and install the pulley?
- FAQs
- How can I check to see if the replacement pulley is aligned with the adjacent accessory pulleys?
- FAQs
- Pulleys are typically made of plastic composite nylon or steel.
- FAQs
- The age and continual flexing of a belt will cause it to crack and deteriorate. Stretching loosens the belt, causing it to slip on the pulleys. A cracked belt will eventually break. The tension and general condition of the belt should be checked periodically.
- FAQs
- How far should the replacement pulley be pressed on the shaft for correct alignment with the other accessory pulleys?
- FAQs
- How important is belt condition and tension?
- Groove Quantity
- 6
- Item Grade
- Standard Replacement
- Mount Type
- Press-Fit
- Mounting Hardware Included
- No
- Mounting Hole Quantity
- 1
- Outside Diameter
- 6.09 IN
- Package Contents
- Pulley
- Product Condition
- New
- Product Line Marketing Stmt
- After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
- Shaft Diameter
- 15.00 MM
- Width (Belt) (mm)
- 22.50
- CTO
- US
- Emission Code
- 1
- Canadian Harmonizing Tariff Code
- 8708999919
- Harmonized Tariff Code (Schedule B)
- 8708998130
- Harmonized Tariff Code (HTS)
- 8708998180
- Life Cycle Status Code
- 2
- Life Cycle Status Description
- Available to Order
- SDR Required Flag
- N
- Maximum Cases per Pallet Layer
- 75
- Pallet Layer Maximum
- 4
- Remanufactured Part
- N
- Warranty Distance UOM
- MI
- Warranty Special
- Limited Lifetime
- Warranty Special UOM
- TX
- Warranty Time UOM
- MO
- Application Summary
- Jeep Wrangler 2011-07
- AAIA Part Type Description
- Power Steering Pump Pulley
- Product Description - Invoice
- New Power Steering Pump Pulley
- Key Search Words
- Pulley, Power Steering Pump Pulley, PS Pulley, Steering Pulley
- Label Description
- New Power Steering Pump Pulley
- Marketing Description
- Power steering pulleys are an important component in the drive system for belt-driven steering pumps and should be replaced during any power steering pump service. CARDONE New Power Steering Pulleys are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, each pulley installs easily, saving precious labor time while providing peace of mind. In an industry where time is such a valuable commodity, CARDONE strives to help make sure your time is spent wisely.
- Short Product Description
- PS Pump Pulley
Specifications
The CARDONE NEW Power Steering Pump Pulley contains no remanufactured components, and is designed to operate in either city or highway driving.
Year | Make | Model | Engine | Notes |
---|---|---|---|---|
2011 | Jeep | Wrangler | 3.8L | [Power Steering Pump Pulley] Quantity needed per vehicle: 1 |
2010 | Jeep | Wrangler | 3.8L | [Power Steering Pump Pulley] Quantity needed per vehicle: 1 |
2009 | Jeep | Wrangler | 3.8L | [Power Steering Pump Pulley] Quantity needed per vehicle: 1 |
2008 | Jeep | Wrangler | 3.8L | [Power Steering Pump Pulley] Quantity needed per vehicle: 1 |
2007 | Jeep | Wrangler | 3.8L | [Power Steering Pump Pulley] Quantity needed per vehicle: 1 |
Warranty Information |
New products purchased from our store are covered by a manufacturer warranty. Other than applicable manufacturer warranties, or as otherwise provided in these Terms & Conditions, there are no warranties, express or implied for any of our products, and we specifically disclaim any warranty of merchantability or fitness for a particular purpose for tires, aftermarket wheels, and tire & aftermarket wheel packages. For other parts, we provide a limited warranty of 6MTH / 12K MILES from the date received by the original purchaser or installer, unless otherwise specified, which covers the replacement of a defective part(s). The warranty applies only to parts replacement with same or better quaity. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will be processed only if it is accompanied by the original sales invoice. All items must be in their original condition and must not be damaged due to incorrect installation upon return. The warranty is limited only to the original purchaser and is non-transferable.
|